

    Restarting after a complete shutdown


Once the UPS is running, and everything is plugged in and turned on in the UPS
room (except the white breaker and RA+DEC enable switches which could wait until
later), go up to the dome:

  - turn on the red main power button (upper right on the telescope console)

  - turn on the telescope power (lower right on the telescope console); you 
      should hear the filter wheel repositioning)

  - turn on the 4kccd power switch and the controller switch


In the warm room:

 Plug in and turn on the computers:

    - turn on the TCS computer (green switch just inside the black cover on the
        right side of the telescope console)

    - turn on the NBS switch (top right of the telescope console)

    - starting on the left end of the computer bench, plug in the gray power 
      cord for bigaux, turn on the bigaux power strip, and push the button 
      on the front of the computer to start it rebooting

    - plug in the two black power cords for kuiper and its monitor in the second 
      pair of orange outlets, and push the button to start kuiper rebooting

    - plug in the black and white twistlock connector for the printer in the 
      "dirty power" outlet

    - plug in the two gray power cords for the Sun power strip and the bigccd2
      power strip in the pair of orange outlets next to the printer cord, and
      turn on both power strips


 Logon and get started:

  - log on to the TCS computer; hit <Enter> for the password; when you get the
    windows desktop, double click on "New TCS" in the center of the screen;
    hit <Enter> once or twice until the TCS program is running

  - log on to bigaux by clicking on user "aux" and typing <Enter>; double click 
    on the Telcom Server icon toward the upper right; when the Telcom window 
    comes up, type <backspace> - if it's working, you get the telescope stream

      The Telcom Server allows bigccd2 to access the telescope information, so
      that it can go in the image headers.  The Telcom Server needs three things
      in order to work: 
         1) internet connection - the green cable with phone-type connectors 
            from the back of the bigaux computer to the DHCP connection on the 
            wall behind bigaux
         2) TCS must be running
         3) TCS connector (gray 9 pin connector connected to a thin gray cable
            that snakes off towards the TCS behind all the other computers) must 
            be plugged into the back of bigaux just below where the small round 
            purple connection to the keyboard plugs in.

  - log on to kuiper (see the kuiper login instruction pages), and make sure 
    that the dataserver, galilserver, and filter gui processes are all running 
    properly 

  - press the button on the front of the bigccd2 computer to start it
    rebooting;  AZCamServer should start automatically.  Once AZCamServer is
    going with no complaints, double-click on the AZCamTook icon at the top right;
    this should do a ccd reset (if the 4kccd power switch and controller are
    turned on on their boxes on the side of the mont4k); it will then be ready 
    to use. 

    Check the time on bigccd2; this should be the time from the GPS server, but
    after a cold start, it won't have had time to synchronize.  Double click on
    the digital clock in the lower left corner, and compare the time with the
    time on the NBS clock.  If detectably different, click "OK" to close the time
    window.  Right-click on the tiny yellow rectangle-on-a-stand to the left of 
    the digital clock (you might need to click first on the < to show hidden 
    icons), then click on "properties" at the bottom, and then on "Sync" at
    the top middle.  Click "Close" to get out (NOT "Exit"!), and recheck the
    synchronization of the digital clock with the NBS, which should be good to
    better than one second.

  - Optional: logon to the Sun (username: bigobs) using the Sun password on the 
    whiteboard.  The Sun isn't needed to observe with the mont4k, but it can be 
    used for other things if you want.

